Unbelievable Wiring 2 Lights To One Switch

How to add one or more additional lights so that all are operated from the same switch.

Wiring 2 lights to one switch. Connect the black wire from the switch to the black wire from the first light and the black wire coming from the second light. At sw1 it is connected to one of the terminals. The other way to wire multiple lights to one switch is to connect all of them directly to the switch in a home run configuration.

The orange red wire is part of the 14 3 wire they used in diagram. If the wire does not need to feed additional receptacles then you would not need the 14 3 and could just use a 14 2 in it s place. You can do this light switch wiring in one of two ways.

Your help will. There will be an additional wire needed often red to connect the switches together to a dedicated screw or input on the switch that is specifically marked for this purpose. How to wire a three way light switch.

Run your cable from the first light to the second light. The neutral from the source is connected directly to the neutral terminal on the light and the source hot is spliced with the white loop wire. The most common is to daisy chain the light fixtures by connecting them to each other and hooking the first one up to the switch.

One switch will be located outside on the porch and the other switch will be on the inside wall next to the door. I know this can be done but i don t have a clue how to connect the switches to the fixture. The black loop wire is connected to the other terminal and at the light to the hot terminal on the fixture.

Attach the white from the second light to the white from the power supply. This circuit is wired with a 2 wire cable running from the light to the switch location. Wrap a piece of black electrical tape around each end of this white wire to indicate that it is a hot wire rather than a neutral wire.