Formidable Yellow Wire On Dimmer Switch

This simple diagram below will give you a better understanding of what this circuit is accomplishing.

Yellow wire on dimmer switch. The earth wires in the cable are bare copper and must be covered with green yellow striped sleeving. If the face plate is plastic there is no need for this short length of earth wire. Black wire power or hot wire white wire neutral bare copper ground when wiring a dimmer switch circuit all we want to do is to control the black wire hot wire to turn dim brighten the load.

The blacks are not. If you have a metal face plate for your switch there should also be a green and yellow earth wire to a small terminal on this. A two way dimmer switch has three wires coming out of the back.

I m interested in connecting in a lutron cl dimmer the old switch was a 3 way. However it might have one red one white and one green or one black one white and one green. Tw01 16 aug 2010 1.

If the light switches on and off then the. I know the black wire connects to the wall black wire. Yes i want to know what the yellow wire connects to and the white wire connects to.

Also which wire connects the bundle of black wires which controls the two way switch. I would appreciate some advice. In a 3 way configuration the load wire should be connected to the l1.

The new switch is lutron electronic dimmer 300w. The ground and neutral from the switch green and white had to be connected to the plain ground wire from the wall. Notice the black wire is.