Casual Light Switch Traveler Wire

The master switch requires a line 110vac with neutral and ground and load.

Light switch traveler wire. Traditionally the slave requires a line and traveler wire to the master. It is also usually black. The ground wire sometimes in a green jacket should be connected to your switch and to your lights.

The grounding wire is connected both to the switch using a pigtail wire and to the second cable run passing onward to the next switch. The white or neutral wire bypasses the switch and goes straight to your lights. A 3 wire nm connects the traveler terminals of the first and second 3 way switch together.

Ground connection diagram is shown separately. In any 3 way there is a master and slave switch. Traveler wires are interchangeable on each switch.

The white neutral wires are connected together in each switch box. The brilliant control can automatically detect which wire is line and which is load so they are interchangeable when installing in a single pole configuration. This is the wire that connects your switch to your light bulb or other load ie.

The common terminal of the second 3 way switch connects to the light fixture s. The travelers of each switch are connect together using cable c4 taped white and red wires. The black and red wires are travelers and are connected to the traveler screw terminals on the two switches.

A fan or other appliance. In a 3 way configuration the load wire should be connected to the l1 terminal of the brilliant control. Diagrams shown on this page are simplified for clarity.